HDMI Amplifiers • Component Amplifiers • Composite Amplifiers • CAT5 Distribution • Switchers • Digital Signage • Digital Media Players • Content Management

HSW88c

Product Details:

HDMI 1.2a/1.3c compliant
HDCP compliant
Any source to be displayed on multiple displays simultaneously
HDMI inputs by push button, IR remote control, or RS-232
Extends video signal up to 35m (115 feet) over Cat5e at 1080pHDMI
1.2a/1.3c compliant
Supports 7.1 channel digital audio
Matrix master can switch every output channel to any input
Extends video signal up to 35m (115 feet) over CAT5e at 1080p
Allows control of main matrix center through control line at remote receiver
Allows control of local HDMI sources such as DVD and TiVo® by
IR extender through control path at remote receiver
Easy installation with rack-mounting and wall-mounting designs for master and
receiver respectively
Network control via RS-232 or USB interface
Remote powering of receivers
Remote has digital readout of selected channel

Click image to enlarge

Download:

Media:

HSW44c

Product Details:

Compliant with HDMI/HDCP requirements
Allows any source to be displayed on multiple displays at the same time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
Allows control of main matrix center through control line at remote receiver
Extends video signal up to 165 feet over CAT5e at 1080p, 1080i, and 720p
Easy installation with rack-mounting and wall-mounting design
Includes four CAT5 to HDMI receivers
Matrix master can switch any output channels to any HDMI inputs by push button,
IR remote control, or RS-232 control
Control of local HDMI sources such as DVD and TiVo® by IR extender through
control path at remote receiver

Click image to enlarge

Download:

Media:

HS103

Product Details:

3 in 1 out Auto Switch
HDCP compliant
Works with XBOX 360, PS3, Blu-ray Players and Apple TV
Automatically switches to active source
No AC adapter needed
Manual source selection switch

NOTE: If your HS103 does not auto-switch, chances are the HS103 IS NOT BROKEN. The HS103 monitors the HDMI port for activity and some video equipment, ie…. satellite receivers, cable boxes, dvd players, etc merely enter a sleep mode when powered down. This mode may leave the HDMI port enabled with a black screen being output. If the video equipment in question does not truly turn off the HDMI port, then the HS103 will not switch from that device to a new source.

To troubleshoot this problem, simply disconnect the AC power to the video equipment that you wish to unselect. If the HS103 then switches to the new video equipment (that is powered on), it is highly likely that the unplugged equipment is not implementing the HDMI port properly. Contact the manufacturer of this equipment to see if there is a firmware update to resolve the issue.